Watch the following video to learn how to install the conduit from the remote dispense tower to the remote chiler!
Begin by measuring the distance between your dispenser and chiller. Cut the tubing to size and attach the street elbows, locking clips, and U-bends to both ends. Next, install the straight elbows into the chiller's ittings. Then, connect the water inlet to the chiller, and connect the trunk line to the tower. Remember, the faucet on the left will always be for sparkling water. Once the lines are connected, pressure-check the system for leaks. finally, use the insulating kit to wrap the trunk lines and bulkheads and you're done!
